Dante ROR2 represents a next generation Dante audio-over-Ethernet solution designed for live sound, broadcast, and permanent install environments. It delivers low latency, sample-accurate sync, and robust network integration for professional audio infrastructures.
Engineered as a modular bridge between Dante ecosystem devices and AVB streams, Dante ROR2 supports high channel counts with deterministic latency behavior. This makes it suitable for complex venue deployments where timing stability and frame-level accuracy are critical.
| Model | Channels | Network Ports | Sync Method | Typical Use Case |
|---|---|---|---|---|
| Dante ROR2-2 | 2 input / 2 output | 2 x 1 GbE | Dante Clocking | Small venue or rack patch panel |
| Dante ROR2-8 | 8 input / 8 output | 2 x 1 GbE | Dante Clocking | Mid-size live consoles and broadcast racks |
| Dante ROR2-16 | 16 input / 16 output | 2 x 1 GbE | Dante Clocking | Main L/R matrix and digital I/O hubs |
| Dante ROR2-32 | 32 input / 32 output | 2 x 1 GbE | Dante Clocking | Large arena systems and routing cores |
Routing and Signal Management Features
Dante ROR2 modules provide flexible matrix routing, allowing any input channel to connect to any output channel across the Dante domain. This capability simplifies complex signal flows that would otherwise require multiple physical patchbays.
Each channel includes configurable gain staging, polarity controls, and sample-accurate delay adjustments, enabling precise alignment with video or with other network domains. The built-in web interface and Dante Controller software make real-time monitoring intuitive for engineers on site.
Installation and Integration Workflows
Deploying Dante ROR2 within an existing network requires attention to switch selection and VLAN planning to maintain sample-accurate timing across long cable runs. Dante Genie Test tools help verify correct cabling and detect potential bottlenecks before audio is patched.
Integration with third-party systems such as AVB switches, Dante VLAN bridges, and control processors is supported through standard IEEE 1722-1 profiles. This allows ROR2 units to coexist with Dante Certified devices from other manufacturers in a unified broadcast or entertainment infrastructure.
Performance and Timing Specifications
Dante ROR2 achieves sub-microsecond clock accuracy across the network, eliminating sample drift between sources and destinations. The device supports redundant clock domains and automatic failover, ensuring continuous operation during planned maintenance or unplanned cable events.
With deterministic latency as low as 128 samples at 48 kHz, Dante ROR2 is well suited for live production workflows where lip-sync and phase coherence between audio and video must be preserved. The modules operate over standard Cat5e/6/6a cabling with structured wiring best practices, reducing installation costs compared to proprietary multicore cable runs.
Deployment Best Practices and Recommendations
- Use dedicated network switches for Dante traffic to avoid contention with routine IT data.
- Enable MSTP or other redundant switching protocols to protect against single points of failure.
- Plan VLANs and PTP domains early to align Dante clocking with existing broadcast infrastructure.
- Document channel mappings and routing in Dante Controller projects for rapid rebuilds.
- Schedule periodic firmware updates and verify licensing status in Dante License Manager.
FAQ
Reader questions
How does Dante ROR2 handle clock synchronization across multiple devices?
Dante ROR2 uses Dante clocking to maintain a single timing domain across the network, selecting one clock master automatically while providing manual override options for redundant clock sources.
Can Dante ROR2 operate in environments with standard IT managed switches?
Yes, when switches are configured for low latency and appropriate QoS, Dante ROR2 can coexist on a corporate IT network, though dedicated audio VLANs are recommended for mission-critical shows.
What software tools are required to configure Dante ROR2 channels and routing?
Dante Controller and the embedded web interface allow full configuration of input/output mapping, gain, delays, and sample rate settings without external hardware configuration tools.
Is Dante ROR2 suitable for broadcast applications with strict latency requirements?
Designed for broadcast infrastructures, Dante ROR2 delivers consistent sub-word latency and frame-accurate sync, enabling reliable integration with video servers, vision mixers, and monitoring systems.