Standing shower dimensions define the space, flow, and comfort of your daily routine. Understanding exact measurements helps you balance accessibility, layout, and style.
This guide breaks down standard sizes, layout tips, and common configurations so you can plan a shower that fits your bathroom and body.
| Type | Width | Depth | Typical Use |
|---|---|---|---|
| Compact | 720 mm | 720 mm | Small en‑suite or powder room |
| Standard Rectangular | 900 mm | 900–1000 mm | Main bathroom, easy entry |
| Angled Corner | 900–1000 mm | 900–1000 mm usable | Corner installation, maximizes floor space |
| Large Walk‑in | 1200 mm | 1200 mm | Master bathroom, accessibility |
| Oversized Custom | 1500+ mm | 1000+ mm | Luxury master suites, multiple users |
Standard Sizes and Layout Planning
Standard sizes give you a starting point, but layout planning ensures your shower feels spacious and safe.
Measure clear floor space, door swing, and reach of fixtures to avoid cramped conditions.
Minimum Clearance and Accessibility
Keep at least 760 mm of clear floor space in the direction of door swing, and consider grab bar locations during layout.
Tile Allowances and Bench Space
Plan for tile thickness and substrate when setting curb height, and decide if a built‑in bench needs extra depth.
Curbs, Curbless, and Sloped Floors
Curb height affects entry ease, while curbless designs create a seamless look but require precise slope.
A subtle slope toward the drain prevents pooling, and a low curb reduces trip risk for daily users.
Standard Curb Heights
Typical curbs range from 70 mm to 100 mm, balancing water containment with accessibility.
Slope and Drain Placement
Floor slopes around 2–5% toward the drain ensure fast runoff while keeping the curb visually low.
Material Choices and Their Space Impact
Tile, stone, and prefabricated panels each influence finished dimensions and installation footprint.
Heavier materials may require extra structural support, subtly shifting layout decisions.
Tile and Natural Stone
Thin‑set tile layouts can follow odd angles, while large-format stone needs careful planning for grout lines.
Acrylic and Fiberglass Units
Precut shells hold tight dimensions, making them ideal for tight corners and consistent sizing.
Recommended Layout Checklist
- Confirm door swing and entry path with measured clearances.
- Mark curb or threshold height on the floor before setting drains.
- Plan tile layout to minimize cuts around corners and seats.
- Verify bench or shelf positions do not restrict movement.
- Check plumbing locations to keep rough‑in adjustments minimal.
FAQ
Reader questions
How do I measure for a standard 900 mm shower?
Measure from finished wall to finished wall at multiple heights, confirm the 900 mm layout matches your tile pattern, and verify door clearance with the shower seat or shelf positions.
What is the ideal depth for a walk‑in shower?
A depth of 900–1000 mm provides comfortable standing and bench space while keeping the floor manageable for cleaning.
Can a corner shower fit in a small bathroom? Yes, an angled corner shower uses walls to contain footprint, and a 720–900 mm version suits small en‑suites without sacrificing usability. How much extra space is needed for door swing and access?
Allow at least 760 mm of clear floor in the door path and keep fixtures like valves away from swing to prevent interference.