Loxon Concrete & Masonry Primer delivers a robust bond between cured concrete and new coatings, ensuring long lasting protection against moisture and chemical attack. This high performance penetrating silane based treatment is engineered for installers who need reliable adhesion on demanding substrate conditions.
Designed for minimal dilution and controlled application, the primer seals capillary pores while preserving vapor compatibility. The result is a streamlined workflow that reduces surface preparation risks and project downtime.
| Product Name | Type | Coverage | Dilution Ratio | Typical Use |
|---|---|---|---|---|
| Loxon Concrete & Masonry Primer | Silane based penetrating primer | 100 to 300 sq ft per gallon | 0 to 10% water | New concrete, resurfaced slabs, masonry |
| Competitor A | Acrylic copolymer | 200 to 400 sq ft per gallon | 10 to 20% water | Light duty residential driveways |
| Competitor B | 问题Siliconate blend | 150 to 250 sq ft per gallon | 5 to 15% water | Over old paint, industrial floors |
Surface Preparation For Loxon Primer Application
Effective bonding starts with disciplined substrate preparation. Remove all contaminants such as oil, grease, curing compounds, and loose material before application.
Profile the surface to an even consistency using shot blasting, scarification, or acid etching followed by thorough rinsing. Allow the slab to dry to a point where standing water is absent, while surface moisture remains within manufacturer limits.
Recommended Prep Checklist
- Sweep and pressure clean the area
- Repair cracks and joint assemblies
- Test moisture vapor emission
- Confirm pH levels are within range
Compatible Coating Systems With Loxon Primer
Loxon Concrete & Masonry Primer is formulated to work seamlessly with a range of topcoats, enabling architects and specifiers to meet performance targets without compromising durability. Proper primer use reduces blistering and delamination in subsequent layers.
Use epoxy, polyurethane, or polysiloxane based systems designed for concrete and masonry protection. Confirm compatibility by reviewing technical data sheets and conducting small scale field tests in critical environments.
Environmental And Safety Considerations
Application conditions significantly influence primer performance and film formation. Maintain air temperatures above the recommended minimum and avoid surfaces prone to rapid drying.
Store products in sealed containers in a dry, well ventilated area away from heat sources. Equip crews with appropriate personal protective equipment and follow all local regulations for handling and disposal.
Key Takeaways For Specifying Loxon Concrete & Masonry Primer
- Apply only to properly prepared, dry, and contaminant free surfaces
- Use compatible topcoats that match the intended exposure conditions
- Monitor ambient temperature and humidity during priming and curing
- Follow storage and safety guidelines to protect personnel and material quality
- Verify performance through small scale trials before full scale roll out
FAQ
Reader questions
Can Loxon Concrete & Masonry Primer be applied in cold weather?
Yes, the primer can be used in cooler conditions when surface temperature remains above freezing and proper drying is ensured. Heated enclosures or temporary covers may be required to maintain optimal curing.
How long after priming can topcoat be applied?
Drying time varies with temperature and humidity, but installers should generally allow the primer to reach a touch dry state before rolling or spraying the chosen topcoat system.
Is dilution required for Loxon Concrete & Masonry Primer?
Dilution with clean water is often unnecessary, though light dilution up to ten percent may improve flow on porous substrates. Always confirm limits from the product data sheet.
Does the primer affect vapor permeability of the slab?
Designed as a penetrating silane treatment, it minimizes film formation while reducing moisture ingress and chloride penetration, helping to preserve vapor movement through the concrete.