When your Pur water filter starts flashing or delivering slower streams, a reset often brings performance back to normal. This guide explains how the Pur water filter reset button works and when to use it.
Understanding the reset process helps you avoid unnecessary replacements and keeps your drinking water safe. Follow the steps below tailored to your specific Pur system model.
| System Type | Reset Method | When to Use | Indicator After Reset |
|---|---|---|---|
| Pitcher with Digital Display | Hold reset button 3–5 seconds | After filter change or error flash | Display clears or shows ready |
| Under-sink System with Smart Faucet | Press faucet button 3 times quickly | After filter replacement or leak alert | Faucet stops blinking |
| Dispenser with Button Panel | Press and hold reset pad for 4 seconds | Slow flow or after cartridge install | System status light turns solid |
| Refrigerator Connected Line | Power cycle fridge then press panel reset | Error code on smart control | Code disappears or clock resumes |
Locate the Pur Water Filter Reset Button
The reset button location varies by model, but it is usually on the pitcher handle, faucet base, or dispenser panel. Consult your user manual to confirm the exact position and label.
Some systems use a hidden reset hole that requires a paperclip, while others feature a clearly marked button near the battery compartment or display. Find this spot before powering the unit on.
Step-by-Step Reset Process
For Pitcher Models
Place the pitcher on a flat surface, ensure it is empty, and plug in if it has an electronic base. Press and hold the reset button until the indicator light changes or flashes, then release.
For Faucet Systems
Turn the Pur water filter reset button on the faucet by rotating to the off position, wait ten seconds, then turn it back on. Hold the button down briefly if your model requires a reset sequence to clear error codes.
Common Issues After Reset
Even after a proper reset, you might notice continued slow flow, unusual taste, or alert lights. These can signal air in the lines, incomplete seating of cartridges, or a need for replacement.
Bleed the system by running several gallons after a reset and check cartridge installation dates. If problems persist, inspect O-rings and housing for cracks that could affect sealing and performance.
Maintenance Tips for Lasting Performance
- Track filter life using the built-in indicator or calendar reminders.
- Rinse new cartridges gently before first use to reduce carbon dust.
- Keep the dispenser mouth clean to prevent debris around the reset button area.
- Run cold water for thirty seconds after cartridge changes to stabilize flow.
When to Replace Rather Than Reset
Frequent resets, recurring error codes, and reduced flow after multiple attempts signal that the cartridge life has ended and replacement is necessary.
- Noticeable drop in flow rate even after reset.
- Unusual odor or taste that flushing does not remove.
- System alerts return within days of reset.
- Visible cracks or swelling in housing or cartridges.
FAQ
Reader questions
Why does my Pur faucet still blink after I press the reset button?
Persistent blinking usually indicates the system did not complete its self-test or sensors still detect an issue. Repeat the reset sequence, verify cartridge seating, and ensure the water supply is fully turned on.
Can I reset the Pur filter remotely if I have a smart model?
Some connected models allow reset commands through the manufacturer app, but most require a manual reset button press on the faucet or dispenser to confirm action and prevent accidental changes.
Is it safe to use the dispenser immediately after a reset? Yes, it is safe, but run a small amount of water to flush air and loose carbon fines. This improves taste and confirms that the flow is normal before filling drinking glasses. What should I do if the reset button feels stuck or unresponsive?
Gentle pressure and a dry cloth for grip often help, but avoid forcing the button. If unresponsive, power down the unit and contact support, as internal components may need service.