Keeping your ResMed AirSense 10 in top condition protects your health and extends the life of your therapy equipment. Regular, careful cleaning reduces mineral buildup, prevents bacteria growth, and helps you breathe easier each night.
This guide walks you through daily, weekly, and filter maintenance for your AirSense 10, with clear checkpoints you can follow quickly and confidently.
| Component | Cleaning Frequency | Recommended Method | Drying Approach |
|---|---|---|---|
| Humidifier Chamber | Daily | Warm water, mild soap, soft cloth | Air dry upside down on clean towel |
| Hose | Daily | Rinse with warm water, wipe exterior | Hang to drip dry, avoid full submersion |
| AirFilter | Weekly | Remove, rinse if washable, or replace | Fully dry before reinserting |
| Mask & Headgear | Daily | Wash with mild soap, rinse thoroughly | Air dry away from direct heat |
Daily Cleaning Routine for AirSense 10
Humidifier Chamber Care
Each morning after use, empty the humidifier chamber and rinse it with warm water. Use a soft brush or cloth with mild soap to remove any residue, then rinse again and leave it upside down to air dry on a clean towel.
Hose Management
Disconnect the hose, drain any remaining water, and rinse the interior lightly. Wipe the outside with a damp cloth, then hang the hose to drip dry or use a hose hanger to keep it organized and moisture-free.
Mask and Headgear Hygiene
Remove the mask and headgear, wash them in warm water with mild soap, rinse thoroughly, and let them air dry. Avoid using harsh detergents or fabric softeners that can irritate your skin or degrade the materials.
Weekly Maintenance for Longevity
AirFilter Inspection and Care
Check the AirFilter once a week. If your model uses a washable filter, rinse it gently under warm water until clear, shake off excess, and let it dry completely before placing it back. Replace disposable filters as recommended by ResMed.
Base Unit Hygiene
Wipe the exterior of the AirSense 10 base with a soft, slightly damp cloth and mild soap. Do not immerse the base in water; keep all moisture away from vents and electrical components to prevent damage.
Monthly Checks and Best Practices
Seal and Frame Integrity
Inspect the mask cushion and frame for cracks or yellowing. Clean the frame with a soft cloth and replace the cushion if you notice any stiffness or discomfort, which can affect sealing and therapy effectiveness.
Performance Monitoring
Pair your AirSense 10 with the myAir app or ResMed AirView to review usage data and leak rates. If you see unusual pressure or drop-offs, check for cracks in tubing, a dirty filter, or an ill-fitting mask.
Key Takeaways for AirSense 10 Care
- Empty and rinse the humidifier chamber daily.
- Dry all components thoroughly to prevent bacteria growth.
- Inspect and replace filters on a consistent schedule.
- Use only mild soap and avoid harsh chemicals.
- Monitor data and comfort to catch issues early.
FAQ
Reader questions
How often should I replace the disposable AirFilter?
Replace disposable AirFilters every 1 to 3 months, or sooner if you live in a high-pollution area or notice reduced airflow.
Can I use hot water to clean the humidifier chamber?
Use warm, not boiling, water for the chamber to avoid warping. Boiling water can damage the plastic and affect the mask fit over time.
Is it safe to clean the hose with a brush?
Avoid inserting brushes into the hose, as this can create cracks. Rinse thoroughly and use a dry cloth to wipe inside if needed.
What should I do if the filter smells musty after cleaning?
If a washable filter retains a musty odor after rinsing, let it dry fully in sunlight or replace it, since persistent smells may indicate mold buildup.