The ebr-025 face toilet bowl is engineered for modern bathrooms that prioritize both hygiene and design clarity. Its compact geometry and smooth internal surfaces support efficient flushing while maintaining a discreet profile for tight spaces.
Designed for installers and end users who value precision, this bowl combines durable materials with straightforward mounting requirements. The following sections outline its technical profile, performance features, and practical guidance.
| Model | EBR-025 | Key Specification | Detail |
|---|---|---|---|
| Type | Face Toilet Bowl | Flush System | Dual-channel siphon jet for rapid bowl evacuation |
| Mounting Style | Rear Wall-Hung | Water Consumption | 4.8 L per flush (符合最新节水标准) |
| Rough-In | 150 mm / 6 in | Trapway Diameter | 52 mm for consistent waste removal |
| Dimensions | 620 x 370 x 1280 mm | Surface Finish | Glazed ceramic with anti-slip rim treatment |
Design Integration and Space Efficiency
The ebr-025 face toilet bowl is tailored for settings where wall-mounted fixtures must align with strict spatial constraints. Its slim tank profile frees floor space, allowing cleaner sightlines and easier access for maintenance.
Wall-hung hardware is integrated with concealed cistern options, supporting minimalist aesthetics. Installers can pair the bowl with floating cabinetry or slim service columns to keep the layout uncluttered.
Hygiene and Cleaning Considerations
Smooth glaze and an optimized rim geometry reduce areas where debris can accumulate. Users can wipe the bowl surface quickly, supporting higher turnover in busy restrooms.
Because the bowl lacks top-front hinges and bulky brackets, cleaning staff can access narrow zones behind the fixture. This design choice lowers chemical usage and shortens downtime during routine sanitation.
Performance and Noise Control
The siphon jet action produces a powerful, quiet flush that minimizes splash while maximizing pipe clearance. Users typically report a short flush duration followed by rapid refill silence.
Internal air channels are tuned to dampen water hammer effects, which reduces vibration and extends the service life of inlet components. This performance is consistent across varying municipal pressure conditions.
Installation and Plumbing Compatibility
Standard 150 mm rough-in spacing aligns with most residential and light commercial builds. The rear-wall carrier system requires precise alignment, but adjustable brackets simplify tolerance compensation on site.
Flexible inlet options accommodate both straight and offset waste connections. Pairing the bowl with a pressure-assisted flush valve can further optimize performance in high-demand scenarios. Ensure supply line clearance before securing the carrier to the wall structure.
Operational Consistency and Long-Term Value
Over extended use, the ebr-025 face toilet bowl maintains steady discharge efficiency with minimal variance in flush volume. This reliability supports predictable maintenance cycles and consistent user satisfaction.
- Verify backflow prevention compliance with local codes before installation
- Confirm 150 mm rough-in and waste alignment to avoid rework
- Use adjustable carrier brackets to compensate for wall tolerances
- Schedule periodic inspection of inlet seals and flush valve function
- Select low-abrasive cleaners to preserve the ceramic glaze
FAQ
Reader questions
Does the EBR-025 require special backflow prevention in high-rise buildings?
Yes, most building codes in mid to high-rise projects mandate a pressure-rated backflow preventer on the supply line. Verify local plumbing standards and coordinate with the project engineer to select a compliant valve.
Can the bowl be retrofitted into an existing restroom without replacing the finished floor?
Yes, the 150 mm rough-in and adjustable carrier allow tolerance compensation. You may need shims under the wall carrier and a slight modification to the waste stub to maintain proper slope toward the pipe.
Are replacement parts for the EBR-025 widely available from standard suppliers?
Yes, because this model uses a common rear-wall carrier and standardized trapway geometry, most plumbing distributors keep gaskets, inlet nuts, and replacement washers in stock.
What maintenance schedule is recommended to preserve the glaze and flush performance?
Routine cleaning with a non-abrasive, pH-neutral agent is sufficient. Avoid chlorine-based tablets pressed directly against the ceramic surface, as prolonged exposure can dull the glaze over time.